Difference between revisions of "Beam Conditions Monitor (ATLAS)"

From Particle Wiki
Jump to: navigation, search
(Created page with "The ATLAS '''Beam Conditions Monitor'''<ref>V. Cindro et al.: '' The ATLAS beam conditions monitor '', [http://doi.org/10.1088/1748-0221/3/02/P02004 JINST 3 (2008) P02004], ([...")
 
Line 1: Line 1:
 
The ATLAS '''Beam Conditions Monitor'''<ref>V. Cindro et al.: '' The ATLAS beam conditions monitor '', [http://doi.org/10.1088/1748-0221/3/02/P02004 JINST 3 (2008) P02004], ([http://inspirehep.net/record/784263 inSPIRE:784263])</ref> ('''BCM''') serves to protect the ATLAS detector from radiation damage caused by uncontrolled beam behaviour. It consists of two stations of detectors located near the [[beampipe]] in the forward and backward direction, at <math>z = \pm 184</math> cm and <math>r = 55</math> mm (corresponding to a [[pseudorapidity]] of about 4.2). The stations are equipped with fast electronics (2 ns rise time), measuring the time-of-flight and pulse height to distinguish events resulting from lost beam particles from those normally occurring in proton-proton interactions. The BCM also provides a measurement of bunch-by-bunch luminosities in ATLAS by counting in-time and out-of-time collisions.
 
The ATLAS '''Beam Conditions Monitor'''<ref>V. Cindro et al.: '' The ATLAS beam conditions monitor '', [http://doi.org/10.1088/1748-0221/3/02/P02004 JINST 3 (2008) P02004], ([http://inspirehep.net/record/784263 inSPIRE:784263])</ref> ('''BCM''') serves to protect the ATLAS detector from radiation damage caused by uncontrolled beam behaviour. It consists of two stations of detectors located near the [[beampipe]] in the forward and backward direction, at <math>z = \pm 184</math> cm and <math>r = 55</math> mm (corresponding to a [[pseudorapidity]] of about 4.2). The stations are equipped with fast electronics (2 ns rise time), measuring the time-of-flight and pulse height to distinguish events resulting from lost beam particles from those normally occurring in proton-proton interactions. The BCM also provides a measurement of bunch-by-bunch luminosities in ATLAS by counting in-time and out-of-time collisions.
  
The sensors are required to tolerate doses up to 500 kGy and in excess of <math>10^15</math> charged particles per cm<sup>2</sup> over the lifetime of the experiment. Each station consists of four modules; each module includes two diamond sensors read out in parallel.
+
The sensors are required to tolerate doses up to 500 kGy and in excess of 10<sup>15</sup> charged particles per cm<sup>2</sup> over the lifetime of the experiment. Each station consists of four modules; each module includes two diamond sensors read out in parallel.
  
 
== References ==
 
== References ==
 
<references />
 
<references />

Revision as of 17:35, 19 March 2018

The ATLAS Beam Conditions Monitor[1] (BCM) serves to protect the ATLAS detector from radiation damage caused by uncontrolled beam behaviour. It consists of two stations of detectors located near the beampipe in the forward and backward direction, at z = \pm 184 cm and r = 55 mm (corresponding to a pseudorapidity of about 4.2). The stations are equipped with fast electronics (2 ns rise time), measuring the time-of-flight and pulse height to distinguish events resulting from lost beam particles from those normally occurring in proton-proton interactions. The BCM also provides a measurement of bunch-by-bunch luminosities in ATLAS by counting in-time and out-of-time collisions.

The sensors are required to tolerate doses up to 500 kGy and in excess of 1015 charged particles per cm2 over the lifetime of the experiment. Each station consists of four modules; each module includes two diamond sensors read out in parallel.

References

  1. V. Cindro et al.: The ATLAS beam conditions monitor , JINST 3 (2008) P02004, (inSPIRE:784263)